[China Glass Net] After the car film was attached to the car, although the operation of the construction party seemed so clean and neat, the construction process did not leak much. So, in the end, are they qualified for the film construction of automotive films? Professional car foil, there should be no quality problems in appearance after filming. Experts said that after the car filming, it can be judged from some appearances whether the film construction of the automobile film is qualified or not, which is mainly judged from the following aspects:
1. Professional car foil. After the film is applied, there should be no scratches, creases or bubbles on the surface of the car film. There should be no defects or debris in the film. If the above situation occurs after the car film is applied, the film is unqualified. . Since the blade used for the professional film is a professional construction blade having a hardness lower than that of the glass, scratching is unlikely to occur on the glass surface.
2, professional car foil, after the film should not exist because of the uneven water squeeze and the water squeeze path irregularity resulting in visual ghosting, water marks, if such problems (especially the front film) will seriously affect the driving Sight, affecting driving safety.
3, professional car foil, after film film should be very close to the edge of the window glass, the gap is about 2-3mm, the naked eye should be observed in a rough way.
4. In the process of car filming, it is not advisable to disassemble the accessories inside the car. After the film is finished, you should check whether the door of the window is seeping water and whether the interior panel is deformed.
Loops Yarn Tartan Fabric,Black And White Plaid Fabric,Colorful Loops Yarns Fabric,Woolen Boucle Fashion Fabric,
SHAOXING GONGXIANG FASHIONABLE DRESS CO.,LTD. , https://www.gxboucle.com