1, handbags and luggage hardware accessories to produce abrasive, abrasive production is very critical, a product to the hands of the manufacturer the first condition is that manufacturers must know how to make abrasives, because do not understand the production of abrasives can not be sure Can't do this product.
2, die-casting products: put the finished abrasive on the die-casting machine die-casting products. Die-casting machine is divided into tonnage, general handbags and luggage hardware accessories are commonly used are 25 tons of die-casting machine, using die-casting machine to lay a good product is also very skillful, which depends on the master of the pressure of the master of the technology, the pressure machine When you want to control the pressure, too much pressure will have a lot of burr products are also very expensive, the pressure is too small, the surface of the product will appear uneven surface is not smooth, so the press master must control the machine in order to play a good product! After the product is put out, it will be diverted.
3. Polishing: This is the most important link in the production process of handbags and luggage hardware accessories. Just like women's jewelry, the sparkling lightness and smoothness are all due to the high degree of polishing and polishing. The effect, in fact, handbags hardware accessories line, a pass through, with jewelry and other hardware products, many production processes are the same process, so think of things to do very smooth and shiny is to do a good job in polishing.
4, the upper piece: because the product should be fixed on the bag so it is on the wire foot piece, the wire is fixed on the foot piece is to use the die-casting die-casting method, used to press with three tons of press, and now changed to use The machine rigs are pressed down to fix them, and now all of them are using bench drills. The technology has also improved, and the production tools have also been changed! There is also a link where some screws are used, so to tap out a screw hole, here Also used a tapping machine tapping a screw hole!
5, the final is to give handbags hardware accessories hardware accessories plating! Plating here depends on the electroplating master's technology, first to wash the impurity in the product area, and then to give the product a bronzed thing on the bottom is a primer, the thicker the better, and then put into the plating tank plating If the plating time is too long, it will not be too short. After the plating is completed, one product will be sent to the customer's hands after packaging.
Want to learn more about buttons: accessible
For more details, please pay attention to WeChat public number: 
Mens Dress Shirts,Casual Mens Dress Shirts,Plain Men'S Dress Shirts,Mens Dress Shirts Formal
Shaoxing Moonten Trade Co., Ltd , https://www.moontenclothing.com