As the company's product quality requirements have increased, users of high- and low-temperature alternating wet heat test chambers have gradually grown. Gradually the use of the test box is high, and the relative troubles are increased. There is no way to be as comfortable as before.
According to the feedback from the after-sales service department, we have come to the big data. Most of the customer's main inquiries are basically related to how to clean the equipment after use, how to set the cycle (programming), humidity display 100%, temperature drop and other old problems. So today we will talk about the cleaning method after using the high and low temperature alternating heat and humidity test chamber!
What we need to do after the end of the high and low temperature alternating heat and humidity test chamber is very simple, only three steps, as follows:
1. Exhaust the remaining water from the water tank out of the box, which not only avoids the fouling of the water tank, but also makes the next test error, and can effectively maintain the water tank to extend the life.
2. Remove the wet gauze from the studio. If the gauze turns yellow and hard, it can be disposed of directly. If the gauze is still intact, it can be cleaned and dried for the next time. This can save gauze and protect the humidity sensor. Then use a clean rag to wipe the water vapor or stains in the workroom. If the studio is large and inconvenient to clean manually, you can also directly use the high temperature function of the high and low temperature alternating heat and humidity test chamber. Set the 50 degree high temperature barbecue for half an hour. .
3. Open the windshield under the studio (the new equipment can be opened directly, the old equipment should be opened with a plum blossom screwdriver), and the dust deposited on the surface should be cleaned with a vacuum cleaner or a dry rag.
PS: The refrigeration system will have a certain temperature after use, so the cleaning of this piece is preferably carried out after the low-temperature alternating heat and humidity test chamber is stopped for half an hour.
Modal Jersey Fabric,Linen Printed Jersey Fabric,Promodal Jersey Knit,Modal Fabric Tencel Fabric
SIRIS HOLDING GROUP CO.,LTD , https://www.sirisknitting.com